Ro-Tile Products Page 6

CODE ACCEPTABILITY, CERTIFICATION

Ro-Tile products have been tested by independent testing laboratories with the following typical results. These products meet or exceed standards of the Ceramic Tile Institute for heavy duty, cement-bodied tile.
· Measurement of Size - Within 3/16 permissable range
·Surface Hardness - Above minimum standards
·Modulus of Rupture - 1115 lb/in2
·Bond Strength - 200 PSI
·Absorption - Body 5%
    - Through face .07%
·Freeze/Thaw - 50+ cycles
·Skid Resistance
    - Ro-Tile in excess of 0.60 F
    -Ro-Stone in excess of 0.70 F
·Impact - No Cracks/Breaks
    - 2' drop with 2" Steel Ball
These tests were performed according to the appropriate CTI, ASTM or SST sections by Pittsburg Testing Laboratory and/or Smith-Emery Company.

For any other application ques- tion contact Ro-Tile Inc. direct.

Ro-Tile,with its factory applied semi- gloss surface coating, is recommended for interior use only. Ro-Stone is recommended for exterior application.

RO-TILE RECOMENDED FOR INTERIOR USE ONLY

Natural Grey antique

Adobe Antique

Mission Red antique

Terra Cotta Antique

Sandstone Antique

Sea Shell Antique

Ro-Tile Colors

-Typical Surface Bullnose
available in all colors-

Autumn Blend*

OT (Available 4" x 8½" only)

Fuego Antique**

Sonora**

Ro-Tile Blends
* The single grouted boards shown cannot represent the full range of Ro-Tile blends.
** Fuego Antique, Mexicali and Sonora are kiln-run tiles that offer the general look of handmade Mexican tile pavers with their production irregularities, but with Ro- Tile's higher quality and longer wearability Shade and texture variations are an inherent part of these beautiful tiles.

CAUTION; DO NOT stick masking tape to Ro-Tile surface.

Ro-Tile Manufacturing, LLC., a division of Coronada Stone.
1625 South Stockton Street Lodi, Ca. 95240
Phone (209) 334-1380 Fax (209) 334-1384